Built-in Commands

UserFrosting's CLI, or Command-line Interface, is called the Bakery. It provides a number of helpful commands that can assist you while you build, manage, and install your application. To view a list of all available Bakery commands, you may use the list command from your UserFrosting root directory:

$ php bakery list

Every command also includes a "help" screen which displays and describes the command's available arguments and options. To view a help screen, simply precede the name of the command with help:

$ php bakery help [command]

General help can also be displayed by running:

$ php bakery help

Always run any bakery command from the project root directory (/). Otherwise, you'll receive a Could not open input file: bakery error.

Available commands

assets:build

The assets:build (alias : webpack & build-assets) command is the general assets building command. It combines assets:install and assets:webpack into a single command:

$ php bakery assets:build [options]
Option Description
-p, --production Compile the assets and asset bundles for production environment
-w, --watch Watch for changes and recompile automatically

The production option is automatically applied when the environment mode is set to production.

See the Asset Management chapter for more information about asset bundles and these options.

assets:install

The assets:install command is an alias for the NPM scripts used to install all required frontend dependencies locally, based on packages.lock. The versions defined in the lock file will be downloaded. Behind the scene, it's an alias for the npm install npm command.

assets:update

The assets:update command is an alias for the NPM scripts used to update all frontend dependencies, ignoring the versions defined in packages.lock. Behind the scenes, it's an alias for the npm update npm command.

assets:webpack

The assets:webpack command is an alias for the Webpack Encore scripts used to compile frontend dependencies to /public/assets. Behind the scenes, it's an alias for the npm commands npm run dev, npm run build and npm run watch. See the table below for more information.

Option Description Alias of
no options Compile the assets for development environment npm run dev
-p, --production Compile the assets for production environment npm run build
-w, --watch Watch for changes and recompile automatically. Only available in development environment. npm run watch

The production option is automatically applied when the environment mode is set to production.

If both watch and production options are used, watch will be ignored and assets will be build for production.

See the Asset Management chapter for more information about asset bundles and these options.

bake

Bake is the general installation command. It combines setup:db, setup:mail, debug, migrate, create:admin-user, assets:build and clear-cache into a single command:

$ php bakery bake

This command should be executed every time you run composer update, change assets, create a new migration, create a new sprinkle or install a community sprinkle.

It is possible and easy to add your own command to the bake command. See Extending Aggregator Commands for more information.

clear-cache

The clear-cache command takes care of deleting all cached data. See Chapter 17 for more information.

$ php bakery clear-cache

When using the file cache store, you might need to run this command as administrator or using sudo to avoid file permission issues.

create:admin-user

The create:admin-user command is used to create a new root user. This command will self-abort if the root user already exists.

$ php bakery create:admin-user [options]

Options can also be used to create the admin user without interaction (See the table below for the list of available options). For example :

$ php bakery create:admin-user --username="admin" --email="[email protected]" --password="adminadmin12" --firstName="Admin" --lastName="istrator"
Option Description
--username[=USERNAME] The admin user username
--email[=EMAIL] The admin user email
--password[=PASSWORD] The admin user password
--firstName[=FIRSTNAME] The admin user first name
--lastName[=LASTNAME] The admin user last name

create:user

This command is the same as create:admin-user, but will create a non-root user.

$ php bakery create:user [options]

debug

The debug command will run a series of tests to make sure everything is ready to run UserFrosting on your system. If you have trouble accessing your UserFrosting installation, you should run this command first to make sure basic requirements are met.

The information displayed by this command can also be useful to other people when asking for help or submitting new issues on GitHub.

$ php bakery debug

The verbose option can be used with this command to display even more information.

$ php bakery debug -v

The debug command is in fact an aggregator of sub-commands, similar to bake. It include the following commands by default:

Command Description Require verbose
debug:config Test the UserFrosting database config
debug:db Test the UserFrosting database connection
debug:events List all currently registered events listener for each events.
debug:locator List all locations and streams, with their respective path, to help debugging.
debug:mail Display Mail Configuration
debug:twig List all twig namespaces to help debugging
debug:version Test the UserFrosting version dependencies
sprinkle:list List all available sprinkles and their parameters

Some results will be only displayed when the verbose mode is active.

It is also possible (and easy) to add your own command to the debug command. See Extending Aggregator Commands for more information.

locale:compare

This command compare two locale dictionaries. A list of all locale keys found in the left locale but not found in the right locale will be generated, as well as a list of all keys with empty values and/or duplicate values. This can be helpful to list all values in a specific languages that are present, but might need translation.

$ php bakery locale:compare [options]

This command is interactive, which means it will ask for which locales to compare. Options can also be used to automatically compare the two locales without user interaction (See the table below for the list of available options). à This command will display :

  • Comparison between Right and Left locales : Returns a list of all differences in both locales using array_diff_assoc. This can be used to compare the two locales.
  • Missing keys from Right found in Left : This can be used to see which keys are missing in the Right locale, but that can be found in the Left locale, so they can be added.
  • Same values found in both Left and Right locale : This can be used to find strings in the right locale that is the same in the left locale. When two locales have the same string value, it may means the string is not translated in the right locale.
  • Empty values for Right locale : Lists keys with empty string for the right locale. These strings might need to be filled in.
Option Description
-l, --left=LEFT The base locale to compare against.
-r, --right=RIGHT The second locale to compare.
--length=LENGTH Set the length for preview column text. [default: 50]

For example :

$ php bakery locale:compare -l en_US -r fr_FR

locale:dictionary

This command shows the compiled dictionary for the selected locale.

$ php bakery locale:dictionary [options]

This command is interactive, which mean it will ask to select the locale to show the dictionary from. Options can also be used to automatically select the locale without user interaction (See the table below for the list of available options).

Option Description
-l, --locale=LOCALE The selected locale.
--length=LENGTH Set the length for preview column text. [default: 50]

For example :

$ php bakery locale:dictionary -l fr_FR

locale:info

This command list all available locales as well as the default locale.

$ php bakery locale:info

Example output :

+------------+----------------------+----------------------+---------+---------+
| Identifier | Name                 | Regional             | Parents | Default |
+------------+----------------------+----------------------+---------+---------+
| en_US      | English              | English              |         | Yes     |
| es_ES      | Spanish              | Español              | en_US   |         |
| de_DE      | German               | Deutsch              | en_US   |         |
| fr_FR      | French               | Français             | en_US   |         |
+------------+----------------------+----------------------+---------+---------+

migrate

Database migrations have the potential to destroy data. Always back up production databases, and databases with important data, before running migrations on them.

The migrate command runs all the pending database migrations. Migrations consist of special PHP classes used to manipulate the database structure and data, creating new tables or modifying existing ones. UserFrosting comes with a handful of migrations to create the default tables. The built-in migrations also handle the changes in the database between versions. See the Migrations section for more information about migrations.

$ php bakery migrate [options]
Option Description
-p, --pretend Run migrations in "dry run" mode
-f, --force Force the operation to run when in production
-d, --database=DATABASE The database connection to use
-s, --step Migrations will be run so they can be rolled back individually

The pretend option can be used to test migrations. This will display the underlying SQL queries:

$ php bakery migrate --pretend

Result :

UserFrosting\Sprinkle\Core\Database\Migrations\v400\SessionsTable
> select * from information_schema.tables where table_schema = ? and table_name = ?
> create table `sessions` (`id` varchar(255) not null, `user_id` int null, `ip_address` varchar(45) null, `user_agent` text null, `payload` text not null, `last_activity` int not null) default character set utf8 collate utf8_unicode_ci
> alter table `sessions` add unique `sessions_id_unique`(`id`)

migrate:rollback

The migrate:rollback command allows you to cancel, or rollback, the last migration operation. For example, if something went wrong with the last migration operation or if you made a mistake in your migration definition, you can use that command to undo it.

Note that migrations are run in batches. For example, when running the migrate command, if 4 classes (or migration definitions) are executed, all 4 definitions will be reverted when rolling back the last migration operation, unless you used the step option with the migrate command.

Options can also be used to rollback more than one migration at a time or to rollback a specific migration.

$ php bakery migrate:rollback [options]
Option Description
-p, --pretend Run migrations in "dry run" mode
-f, --force Force the operation to run when in production
-d, --database=DATABASE The database connection to use
-m, --migration=MIGRATION The specific migration class to rollback
-s, --steps=STEPS Number of steps to rollback [default: 1]

migrate:reset

The migrate:reset command is the same as the rollback command, but it will revert every migration. Without options, this is the same as wiping the database to a clean state.

Use this command with caution!

$ php bakery migrate:reset [options]
Option Description
-p, --pretend Run migrations in "dry run" mode
-f, --force Force the operation to run when in production
-d, --database=DATABASE The database connection to use

migrate:reset:hard

The migrate:reset:hard command is the same as the migrate:reset command, but it will bypass all migrations and drop all tables from the database. This can be used as a last resort when a specific migration won't allow you to reset the whole stack.

Use this command with extreme caution!

$ php bakery migrate:reset:hard [options]

migrate:refresh

The migrate:refresh command will rollback the last migration operation and execute it again. This is the same as executing migrate:rollback and then migrate.

$ php bakery migrate:refresh [options]
Option Description
-f, --force Force the operation to run when in production
-d, --database=DATABASE The database connection to use
-s, --steps=STEPS Number of steps to rollback [default: 1]

migrate:status

The migrate:status command will show what migration have been run and which one can be run. It will also display if a previously run migration is available to be rolled back.

$ php bakery migrate:status [options]
Option Description
-d, --database=DATABASE The database connection to use

route:list

Display the list of all registered routes.

$ php bakery route:list [options]
Option Description
--method=METHOD Filter the routes by method
--name=NAME Filter the routes by name
--uri=URI Filter the routes by uri
--reverse, -r Reverse the ordering of the routes
--sort=SORT The column (method, uri, name, action) to sort by [default: "uri"]

Example result:

$ php bakery route:list --uri=/account/ --method=POST --sort=action
Registered Routes
=================

 -------- ------------------------------ ---------- -------------------------------------------------------------------------------
  Method   URI                            Name       Action
 -------- ------------------------------ ---------- -------------------------------------------------------------------------------
  POST     /account/forgot-password                  UserFrosting\Sprinkle\Account\Controller\AccountController:forgotPassword
  POST     /account/login                            UserFrosting\Sprinkle\Account\Controller\AccountController:login
  POST     /account/settings/profile                 UserFrosting\Sprinkle\Account\Controller\AccountController:profile
  POST     /account/register                         UserFrosting\Sprinkle\Account\Controller\AccountController:register
  POST     /account/resend-verification              UserFrosting\Sprinkle\Account\Controller\AccountController:resendVerification
  POST     /account/set-password                     UserFrosting\Sprinkle\Account\Controller\AccountController:setPassword
  POST     /account/settings              settings   UserFrosting\Sprinkle\Account\Controller\AccountController:settings
 -------- ------------------------------ ---------- -------------------------------------------------------------------------------

seed

The seed command can be used to run any registered seed classes. See Chapter 12 for more info on database seeds.

$ php bakery seed [options] [--] <class> (<class>)...

If no <class> is specified, an interactive list will be displayed, prompting you to select which registered seed(s) to run.

Multiple seed classes can be run at once by separating them with a space. For example, to run Class1 and Class2 :

$ php bakery seed Class1 Class2
Option Description
-f, --force Force the operation to run when in production

seed:list

The seed:list command will list all database seeds available. See Chapter 12 for more info on database seeds.

$ php bakery seed:list

Example result:

Seeds List
==========
 * UserFrosting\Sprinkle\Account\Database\Seeds\DefaultGroups
 * UserFrosting\Sprinkle\Account\Database\Seeds\DefaultPermissions
 * UserFrosting\Sprinkle\Account\Database\Seeds\DefaultRoles

setup:db

The setup:db command can be used to setup the database configuration interactively. This configuration will be saved in the app/.env file. This can also be done manually by editing the app/.env file or using global server environment variables. See Environment Variables for more information about these variables.

$ php bakery setup:db [options]

Options can be used to define each variable individually in a non-interactive way. (See the table below for the list of available options.) For example:

php bakery setup:db --db_driver=mysql --db_name=userfrosting --db_port=3306 --db_host=localhost --db_user=userfrosting --db_password=secret
Option Description
--force Force setup if db is already configured
--db_driver[=DB_DRIVER] The database driver ["mysql","pgsql","sqlsrv","sqlite"]
--db_name[=DB_NAME] The database name
--db_host[=DB_HOST] The database hostname
--db_port[=DB_PORT] The database port
--db_user[=DB_USER] The database user
--db_password[=DB_PASSWORD] The database password

setup:mail

The setup:mail command can be used to setup the outgoing email configuration. Different setup methods can be selected to guide you into configuring outgoing email support. This configuration will be saved in the app/.env file.

As with the database setup, this can also be done manually by editing the app/.env file or using global server environment variables. See Environment Variables for more information about these variables.

$ php bakery setup:mail [options]

Options can also be used to defined each variable individually in a non-interactive way. When using one or more options, the "SMTP Server" method will automatically be selected.

Option Description
--force Force setup if SMTP appears to be already configured
--smtp_host[=SMTP_HOST] The SMTP server hostname
--smtp_user[=SMTP_USER] The SMTP server user
--smtp_password[=SMTP_PASSWORD] The SMTP server password
--smtp_port[=SMTP_PORT] The SMTP server port
--smtp_auth[=SMTP_PASSWORD] The SMTP server authentication
--smtp_secure[=SMTP_SECURE] The SMTP server security type

setup:env

The setup:env command can be used to select the desired Environment Mode. The default choices are default, production and debug. A custom value can also be defined.

As with the database and outgoing email setup, this can also be done manually by editing the app/.env file or using global server environment variables. See Environment Variables for more information about these variables.

$ php bakery setup:env [options]
Option Description
--mode[=MODE] The environment to use

Example usage :

php bakery setup:env --mode=production

setup

The setup command combines the setup:db, setup:mail, and setup:env commands using interactive mode only. This command doesn't accept any options.

$ php bakery setup

It is also possible (and easy) to add your own command to the setup command. See Extending Aggregator Commands for more information.

sprinkle:list

Display the list of all loaded sprinkles. It will also display the base namespace that classes from the sprinkle are expected to have, as well as the sprinkle's base path.

$ php bakery sprinkle:list

Example result:

 Loaded Sprinkles
================

 ------------------ --------------------------------------- ---------------------------------------------------------------------- 
  Sprinkle           Namespace                               Path                                                                
 ------------------ --------------------------------------- ---------------------------------------------------------------------- 
  Core Sprinkle      UserFrosting\Sprinkle\Core\Core         /home/UserFrosting/vendor/userfrosting/sprinkle-core/app/src/../     
  Account Sprinkle   UserFrosting\Sprinkle\Account\Account   /home/UserFrosting/vendor/userfrosting/sprinkle-account/app/src/../  
  AdminLTE Theme     UserFrosting\Theme\AdminLTE\AdminLTE    /home/UserFrosting/vendor/userfrosting/theme-adminlte/app/src/../    
  Admin Sprinkle     UserFrosting\Sprinkle\Admin\Admin       /home/UserFrosting/vendor/userfrosting/sprinkle-admin/app/src/../    
  My Application     UserFrosting\App\MyApp                  /home/UserFrosting/app/src/../                                       
 ------------------ --------------------------------------- ---------------------------------------------------------------------- 

serve

The serve command is used to execute PHP's Built-in web server. This is a simple way to test your application without having to configure a full web server.

$ php bakery serve [options]

Hit ctrl+c to quit.

Option Description
-p, --port=PORT The port to serve the application on [default: "8080"].

test

The test command is used to execute PHPUnit tests.

Tests from a specific sprinkle can optionally be run using the 'testscope' argument (eg. php bakery test SprinkleName). This argument can also run a specific test class (eg. php bakery test 'UserFrosting\Sprinkle\SprinkleName\Tests\TestClass') or a specific test method (eg. php bakery test 'UserFrosting\Sprinkle\SprinkleName\Tests\TestClass::method').

See the Automated Testing section for more information.

$ php bakery test [options] [--] [<testscope>]
Option Description
-c, --coverage Enable code coverage report.
--coverage-format=COVERAGE-FORMAT Select test coverage format. Choose from html, clover, crap4j, php, text, xml, etc. Defaults to HTML.
--coverage-path=COVERAGE-PATH Code coverage report saving location. Default to _meta/coverage.

UserFrosting's built-in integration tests use a temporary in-memory SQLite database. For testing to run successfully, you must have the php-sqlite3 package installed and enabled.

Alternatively, you can create a separate testing database and override the test_integration database settings in testing.php environment mode.

test:mail

The test:mail command lets you test the email sending capability of your UserFrosting setup by sending a test email. By default, it will send the test email to the admin contact defined in the configuration file, but this can be changed using the provided --to options.

$ php bakery test:mail [options]
Option Description
--to=TO Email address to send test email to. Use admin contact if omitted.